![LS-1600V2-6P-HPWR-GL [(H3C S1600V2-6P-HPWR L2 Ehernet Switch With 5*10/1001000BASE-T Ports (4 PoE+ Ports Included) and 1*100M//1G Port. (AC))]](/web/image/product.product/671/image_1024/%5BC1-0332%5D%20LS-1600V2-6P-HPWR-GL%20%5B%28H3C%20S1600V2-6P-HPWR%20L2%20Ehernet%20Switch%20With%205%2A10-1001000BASE-T%20Ports%20%284%20PoE%2B%20Ports%20Included%29%20and%201%2A100M--1G%20Port.%20%28AC%29%29%5D?unique=0b4925c)
LS-1600V2-6P-HPWR-GL [(H3C S1600V2-6P-HPWR L2 Ehernet Switch With 5*10/1001000BASE-T Ports (4 PoE+ Ports Included) and 1*100M//1G Port. (AC))]
H3C S1600V2 Ethernet switch product is independently developed by New H3C Technologies Co., Ltd. (H3C). It is a web managed switch designed for network environments. It is easy to install, provides a rich set of features, and is widely used in small and medium-sized enterprises, commercial chains, CCTV, campuses, and other scenarios.
H3C LS-1600V2-6P-HPWR-GL — Technical Specification\
| Category | Specification |
|---|---|
| Model | LS-1600V2-6P-HPWR-GL |
| Series | H3C S1600V2 |
| Device Type | Layer 2 Web Managed Gigabit PoE+ Switch |
| Switching Layer | Layer 2 |
| Ethernet Ports | 5 × 10/100/1000BASE-T |
| Uplink Ports | 1 × 1000BASE-X SFP |
| PoE Support | Yes (PoE+ ports 1–4) |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| PoE Type | HPWR (High Power PoE) |
| Total PoE Budget | 73W |
| Max PoE per Port | Up to 30W |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.93 Mpps |
| MAC Address Table | 2K |
| VLAN Support | Port-based VLAN |
| QoS | SP, WRR |
| Spanning Tree | STP / RSTP |
| Security Features | 802.1X, DHCP Snooping, MAC filtering |
| Loop Protection | Supported |
| IGMP Snooping | Supported |
| Management | Web GUI, CLI, SNMP |
| CPU | 800 MHz |
| Memory | 4 MB Flash |
| Fan | Fanless (silent operation) |
| Surge Protection | 6KV |
| Input Power | AC 100–240V |
| Max Power Consumption | ~86W (with PoE load) |
| Dimensions | 130 × 124 × 27 mm |
| Weight | ≤ 0.5 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
